Packed:
bulk, cisterns, 1000 litre tanks, packing in barrels available upon prior agreement
It is applied mostly in ceramic plants, in the cement, machine, and construction industries, to lubricate steel, wood-based, and other moulds during the manufacture of products, in order to prevent the adherence of mass to the surface of a mould and to protect steel moulds against corrosion. Owing to this, the mould is separated easily from a product, while its surface remains smooth.
| LP / NO. | Parametr / Parameter | Jednostka / Unit | Zakres / Range | Metoda Badania / Standard For Tests |
|---|---|---|---|---|
| 1 | Gęstość w temp. 15°C Density at 15°C | kg/m³ | min. 820 / 920 max. | PN-EN ISO 3675:2004 |
| 2 | Liczba zmydlenia The saponification number | mgKOH/g | min. 4 / --- max. | PN-ISO 6293-1:2011 |
| 3 | Temperatura zapłonu Flash point | °C | min. 62 / --- max. | PN-EN ISO 2719:2007 |
| 4 | Lepkość kinetyczna w temp. 50°C Kinematic viscosity at temp. 50°C | mm²/s | min. --- / 4 max. | PN-EN ISO 3104:2004 |
| 5 | Temperatura płynięcia The saponification number | °C | min. --- / -5 max. | PN-ISO 3016:2005 |
| 6 | Skład frakcyjny:
Distillation characteristics:
do temp. 250°C destyluje it distills up to temp. 250°Cdo temp. 350°C destyluje it distills up to temp. 250°C | % (V/V) % (V/V) | min. --- / 64,8 max. min. --- / 84,8 max. | PN-EN ISO 3405:2011 |
| 7 | Zawartość wody Water content | % (m/m) | min. --- / 0,15 max. | |
| 8 | Wygląd zewnętrzny Externl appearance | Klarowny, brak zawiesin, brak osadów Clear, no suspensions, no of sediments | Spełnia wymagania meets the requirements | Organoleptycznie organoleptically |
| 9 | Barwa Colour | Od jasnożółtej do jasnobrązowej from pale yellow to pale brown | Spełnia wymagania meets the requirements | Organoleptycznie organoleptically |
| 10 | Zapach Odor | Swoisty Specyfic | Spełnia wymagania meets the requirements | Organoleptycznie organoleptically |
bulk, cisterns, 1000 litre tanks, packing in barrels available upon prior agreement
The offered product is not and will not be designated for use in drives of combustion motors or for combustion purposes or as an admixture or additive to engine fuels or combustion fuels or in the sales for the above-mentioned purposes. If a Buyer, contrary to the designated use of the product attributed by the Seller, changes the purpose of goods, i.e. designates them for use, offers for sales or uses them in combustion engines or for combustion purposes or as an admixture or additive for engine fuels or combustion fuels, the Buyer shall be liable for excise tax under art. 8(2)(1) of the Polish Act of 6 December 2008 on excise tax as well as according to the Directive UE2003/96/EC of 27 October 2003 and relevant regulations applicable in the state to which products are designated.